Photo by https://kaboompics.com/ on Pexels
The toilet bowl is rising, it is late, and the plunger is nowhere to be found. Maybe you are in a rental that never had one, or you lent it to a neighbour years ago, or it split in half the last time you used it. Either way, you have a blocked toilet and need it fixed now.
The good news is that most toilet blockages are caused by a simple build-up of paper and waste, and you can clear many of them using household items. The bad news is that there are plenty of popular "fixes" that do not work or can damage your plumbing.
This guide covers seven methods to unblock a toilet without a plunger, how to choose between them, what to avoid, how to tell whether the blockage is simple or serious, and when to call a plumber.
Before You Start
- Stop flushing. Every flush adds more water. If the bowl is already high, flushing again will overflow it.
- Lift the cistern lid and check that the water level is not too high. If the bowl is close to overflowing, lift the float or close the cistern's water supply valve (usually a small tap on the wall behind or beside the toilet) to stop more water filling.
- Protect your floor. Lay old towels or newspaper around the base.
- Put on rubber gloves. Plumbing is messy. See why rubber gloves are essential for any plumbing repair.
- Open a window and keep children and pets out of the room.
Method 1: Hot Water and Dish Soap
This is the gentlest and safest place to start, and it works well for blockages caused by too much toilet paper or soft waste.
- Squirt about half a cup of dishwashing liquid into the bowl.
- Let it sit for 10 to 15 minutes so it can coat the blockage and lubricate the pipe.
- Heat a bucket of water until it is hot but not boiling. Boiling water can crack porcelain.
- Pour it into the bowl from waist height, to add force.
- Wait a few minutes, and see if the level drops.
You can repeat this once or twice.
Method 2: Baking Soda and Vinegar
This produces a fizzing reaction that can help break down mild clogs.
- Pour about one cup of baking soda into the bowl.
- Slowly add two cups of white vinegar.
- Let it fizz for 15 to 30 minutes.
- Follow with a bucket of hot (not boiling) water.
It is not a miracle cure and works best on small, soft blockages. For stubborn clogs, move on to another method.
Method 3: A Bucket of Water (The Forceful Pour)
If the water level in the bowl is low, a quick pour can create enough pressure to push the blockage through.
- Fill a bucket with warm water.
- Pour it quickly and steadily into the bowl from about waist height.
- Do not pour so fast that it overflows.
If the bowl is already full, do not use this method. Remove some water first.
Method 4: A Wire Coat Hanger
A straightened coat hanger can hook or break up a blockage close to the bowl's outlet.
- Untwist a wire coat hanger and straighten it, leaving a small hook at one end.
- Wrap the end in an old cloth or tape so it does not scratch the porcelain.
- Gently feed it into the drain opening and twist or push to break up the blockage.
- Be careful. Do not force it, and stop if you meet hard resistance.
This works for objects or dense clumps near the trap. It is not suitable for blockages deeper in the pipe.
Method 5: A Makeshift Plunger with a Plastic Bag or Wrap
You can create a basic seal and pressure without a plunger.
- Wrap a bag or cling film tightly across the bowl opening, creating an airtight seal, or use a plastic bottle as a pump.
- Push down firmly a few times.
- The pressure and suction can dislodge a simple clog.
Alternatively, use a plastic bottle with a cut-off base, pressing the neck into the drain opening and pumping the bottle.
It is a rough substitute, and results vary, but it is useful in a pinch.
Method 6: A Wet and Dry Vacuum
If you have a wet and dry vacuum cleaner, it can pull a blockage out of the bowl.
- Set it to wet mode and remove any dry filter.
- Remove as much water from the bowl as you can.
- Seal the end of the hose around the drain opening with a towel.
- Run the vacuum to pull the blockage out.
Only use this if your vacuum is rated for liquids. Never use a standard household vacuum on water.
Method 7: A Toilet Auger (Closet Auger)
A toilet auger is a specialist tool with a flexible cable and a hand crank. It is designed for exactly this problem and is the closest alternative to a plunger. You can buy one from a hardware store.
- Feed the curved end of the auger into the drain.
- Crank the handle while pushing gently, so the cable passes through the trap.
- When you feel resistance, keep turning to break up or hook the blockage.
- Pull the auger back out slowly (wear gloves, and expect it to be dirty).
- Flush once to test.
The toilet auger is usually the most effective option when the simple methods fail. If you use one regularly, consider keeping it with your essential plumbing tools.
What Not to Do
- Do not use acid or strong chemical drain cleaners in a toilet. They are corrosive, can damage the toilet and pipes, and are dangerous if they splash or if you need to use a plunger or auger afterwards. Our guide on what acid plumbers use explains why this is a job for professionals.
- Never mix cleaning products. Mixing bleach with ammonia, vinegar or other cleaners can create toxic gases.
- Do not flush repeatedly to see if it will clear.
- Do not use boiling water, which can crack the porcelain.
- Do not force sharp or rigid objects into the drain. You can scratch the bowl or damage the trap.
- Do not flush items that should not go in the toilet in the first place, such as wipes (even those labelled flushable), nappies, cotton buds, sanitary products and paper towels.
How to Tell If It Is a Simple or Serious Blockage
| What you see | Likely situation |
|---|---|
| Slow to drain, bowl rises then falls | Partial blockage, often fixable at home |
| Bowl full and not moving | Full blockage near the toilet, may need an auger |
| Gurgling from the toilet or other drains | Possible main line or vent problem. See why drains gurgle |
| Other toilets, showers or sinks are also slow or blocked | Likely a main sewer line issue |
| Water or sewage coming up in the shower or floor waste | Main line blockage |
| The toilet keeps blocking again and again | Underlying cause. See why your toilet keeps blocking |
When to Call a Plumber
Stop and call a licensed plumber if:
- None of the methods above have worked
- More than one fixture is affected
- Sewage is coming up in the shower, bath or floor drains
- You can hear gurgling in other drains
- The blockage keeps returning
- An object (such as a toy) has been flushed and is stuck
- You have a septic or onsite system and are unsure about what is safe
- You are not comfortable continuing
Plumbers have drain machines and cameras that can clear and diagnose blockages that are out of reach of household methods. For recurring problems, a CCTV drain inspection shows what is happening inside the pipe.
How to Prevent Blocked Toilets
- Flush only human waste and toilet paper
- Bin wipes, cotton buds, sanitary products and nappies, even if they say flushable
- Use less toilet paper per flush, or flush twice for heavy use
- Keep a plunger or toilet auger somewhere handy, so you never have to improvise
- Teach children what can and cannot be flushed
- Check for a failing cistern that is not flushing with enough force. See our guide on toilets that won't flush
- Keep trees away from sewer lines, and clear root problems early. See our guide to tree roots in sewer lines
Frequently Asked Questions
Will hot water and dish soap really unblock a toilet?
For paper and soft waste, yes, often. The soap lubricates the blockage and the hot water helps break it down. It is less effective on solid objects.
Is it safe to use baking soda and vinegar in a toilet?
Yes. It is gentle and safe for pipes. It is not very strong, so it works best on minor blockages.
Can a blocked toilet fix itself?
Sometimes a partial blockage clears with time as paper breaks down, but waiting is not a reliable fix and rarely works for a full blockage.
Why won't my toilet unblock?
The blockage may be too dense, too deep, or in the main line. Multiple fixtures affected or repeat blockages point to a bigger problem.
Can I use a drain snake instead of a toilet auger?
A standard drain snake can scratch the porcelain. A toilet (closet) auger is designed with a protective sleeve for this job.
How long should I wait before calling a plumber?
If you have tried a couple of methods without luck, or you see signs of a main line problem, call straight away. A blocked toilet is hard to live with and can get worse.
Final Thoughts
A blocked toilet is stressful, but you do not need a plunger to fix most of them. Start with the gentlest method, hot water and dish soap, then work up to a toilet auger if you need to. Avoid harsh chemicals, and call a plumber early if the problem is affecting more than one fixture or keeps coming back.
If you cannot clear it yourself, Coastal Plumbing Professionals provides fast, reliable toilet repairs and blocked drain services across the Gold Coast. Call 1300 590 085 and we will get it flowing again.
Resources
- Plumbing and drainage | Queensland Building and Construction Commission
- What not to flush | Water Services Association of Australia
- Sewerage services | City of Gold Coast
- Master Plumbers Australia
- Safe use of household chemicals | Queensland Health